Stöckli Laser WRT Pro Skis + SRT12 Bindings 2026

Product Details

Rocker Type

Camber

Core

Race Core– Beech and Poplar woods

Laminates

2 Titanal Laminates– Above and below the core

Carbon Power Turn– Carbon strip inserts around the binding plate underneath the wood core. Carbon fibers running lengthwise are tensioned during the initiation phase of the turn and release during the finish of the turn, effectively creating an extra explosive acceleration. Benefits include stronger acceleration, quicker edge switching, and improved agility.

Sandwich Construction

Sidewalls

Racing Sidewalls Black– Phenol sidewalls with a harder resin plus carbon black lead to greater stability and more direct power transfer. Benefits include faster and more direct power transmission and improved agility when switching edges.

Base

Racing Graphite Base– This coating has a higher graphite content compared to a conventional coating, thus offering even better gliding properties. The higher graphite content makes the coating highly abrasion resistant: less dust and other particles in the snow can penetrate the coating and cause a braking effect. Benefits include better gliding properties in all snow conditions, abrasion resistant coating, and more resistance to dust and particle ingress

Edges

Solid Metal Edge– Wider than conventional edges, a wider edge makes the ski a little more stable.

Full Edge Contact– The widest points of the sk are set further forward or back. This makes the shovel grip faster and the part of the edge in contact with the snow when the ski is tilted, becomes longer. Benefits include easier, faster turn initiation and improved grip in the turn due to the longer contact area.

Factory Edge Bevels– Base = 1.0˚. Side Edge = 2.0˚

Graphics

Titanal Technology Pro– An additional protective coating featuring a slightly raised structure is applied to the titanal surface. This gives the ski better protection from scratches on the top surface and gives it a special haptic. Benefits include enhanced scratch resistance, optical effect, and reduced weight as the graphics are printed directly on the titanal.

Binding Plate

SRT Speed D20 Plate– (pre-drilled)

Included Bindings

SRT 12 Bindings Included | Compatible with GripWalk Soles– DIN range 4 - 12

Bindings Do Not Come Mounted to Skis– Always have a certified binding technician mount and adjust your bindings.

Additional Features

Made in Switzerland

Specs

• Terrain: Carving More

  Terrain

  
  
  CarvingFor those that like the classic feeling of laying a ski over on edge and arcing a perfect turn, carving skis are what you want. These skis have narrower waists and shorter turn radii for edge to edge quickness and responsive turn initiation and exit on groomed runs and hard pack. The beginner-intermediate skis in this category are designed to make learning how to turn as easy as going from pizza to French fries.
  
  
  
• Skis: With Bindings
• Ability Level: Advanced-Expert More

  Ability Level

  
  
  Advanced-ExpertWhether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you´ll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
  
  
  
• Rocker Type: Rocker/Camber More

  Rocker Type

  
  
  Rocker/CamberRocker/Camber skis pair a traditional cambered profile underfoot with an elongated, early rise tip borrowed from fully rockered skis. This profile places the front contact point further back from the tip, while the rear contact point remains close to the tail. The rockered tip allows for better flotation and less edge catch for increased float in deep snow, while the cambered rear stores and transmits energy similarly to a fully cambered ski.
  
  
  
• Turning Radius: Short More

  Turning Radius

  
  
  Short< 16 m radius is best for carving.
  
  
  
• Core/Laminates: Carbon, Metal, Wood
• Tail Type: Flat More

  Tail Type

  
  
  FlatThis is your traditional tail, designed to have edge contact all the way through the tail, and only designed for skiing forward. This is also preferred for alpine touring, as you can stick the tails of your skis in the snow.
  
  
  
• DIN: Release Value Low: 4
• DIN: Release Value High: 12
• Warranty: 2 Years