Line Skis Blend Skis 2024

Product Details

Rocker Type

Rocker Profile– 4mm Tip / 4mm Camber / 4mm Tail

Flex

Symmetric Flex™– The same flex pattern in front and behind your boot conforms to terrain equally riding forward & backward.

Sidecut

5-Cut™– Five different radiuses are blended into the ski´s sidecut. The result? A wide variety of turn shapes and an intuitive feel.

Core

Maple Macroblock™– Two full length maple stringers surrounded by aspen for increased strength and durability.

Laminates

Carbon Olliband– Pre-stretched carbon down the center of the ski for added pop and play in freestyle skis.

Sidewalls

Capwall™– Combining the precision of sidewall underfoot and the lightweight, durable performance of cap in the tip, Capwall™ construction provides the best of both worlds.

Base

Fatty Base | Sintered 1.7mm– High density sintered bases reduce friction against the snow allowing for more speed and better durability.

Edges

Fatty Edge | 2.5mm x 2.2mm– 30% thicker edge dramatically increases durability and tuning life of these skis.

Additional Features

Stance Back from Center– 40 mm

Binding Compatibility

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Specs

• Terrain: Park & Pipe, All-Mountain More

  Terrain

  
  
  Park & PipePark and pipe skis, often called freestyle skis, are for skiers who spend the majority of their time on jumps, rails, and jibs of all kinds. Traditionally park and pipe skis have narrower waists with full camber profiles, but this category is incorporating more rocker patterns and different shapes. You will almost always find these skis with twin tips as well as other park specific features like thicker, more durable edges, dense extruded bases, and butter zones. All-MountainAll-mountain skis are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain. If you’re only going to own one ski to do it all, this is what you want. All-mountain skis generally have what we call mid-fat waists that range from 80-110 mm.
  
  
  
• Skis: No Bindings
• Ability Level: Intermediate-Advanced More

  Ability Level

  
  
  Intermediate-AdvancedWhether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
  
  
  
• Rocker Type: Rocker/Camber/Rocker More

  Rocker Type

  
  
  Rocker/Camber/RockerRocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
  
  
  
• Turning Radius: Medium More

  Turning Radius

  
  
  Medium17-22 m radius is best for all-mountain and park & pipe.
  
  
  
• Core/Laminates: Carbon, Wood
• Tail Type: Full Twin Tip More

  Tail Type

  
  
  Full Twin TipDesinged to allow you to ski backwards, full twin tips are found primarily on park & pipe skis and freestyle powder skis. More and more, we are seeing twin tips on all-mountain skis of all abilities, as it makes it a little easier to get around, and for the most part does not inhibit forward skiing.
  
  
  
• Warranty: 2 Years