Armada Trace 108 Skis + Warden 13 Demo Bindings 2020 - Used

Product Details

Rocker Type

EST All-Mountain Rocker– Entry rocker with positive camber under foot with subtle tail rocker. Floats in soft snow while making sure the ski stays on rails.

Flex

Flex Pattern (1=Soft, 10=Stiff)– Tip: 6.5, Waist: 7, Tail: 7.5

Shape

Tapertops– Beveled topsheets shave mass and lower profile in high density snow, while strengthening the ski´s perimeter for maximum efficiency and stability.

Core

Hybrid Ultra Light Core– A combination of lightweight woods throughout and hardwood laminates underfoot creates the ultimate in agility and maneuverability without sacrificing any security or dampness.

Laminates

Xrystal Mesh Damping– Xrystal Mesh combines Innegra™ Olefin fiber with carbon to form an extremely damp and impact resistant laminate layer.

Laminate Matrix– Directional layering of fiberglass dictates flex pattern and torsional rigidity.

Sidewalls

AR75 Sidewalls– Sidewalls provide improved edge pressure under the boot, while cap constuction in the tip and tail provides smooth turn initiation and less hookiness - 75% sidewall, 25% cap.

Base

Comp Series Base– Armada´s fastest sintered base.

Edges

1.7 mm Impact Edge– Heat treated, built to avoid excess weight while maintaining durability

Included Bindings

Includes Warden 13 Demo Bindings– DIN Range 4 - 13

Bindings Come Mounted to Skis– Always have a certified binding technician adjust your bindings.

Specs

• Terrain: Big Mountain, Alpine Touring More

  Terrain

  
  
  Big MountainBig mountain skis are designed for charging big lines with high speeds and big airs. These skis varry in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer side, often with more rocker in the tip and less in the tail. Alpine TouringAlso known as backcountry skis, alpine touring (AT) skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins. AT skis vary in width and weight, with the wider heavier versions usually used for winter/deep snow touring and the skinnier, lighter skis usually used for spring/summer/long distance touring.
  
  
  
• Skis: With Bindings
• Ability Level: Advanced-Expert More

  Ability Level

  
  
  Advanced-ExpertWhether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you´ll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
  
  
  
• Rocker Type: Rocker/Camber/Rocker More

  Rocker Type

  
  
  Rocker/Camber/RockerRocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
  
  
  
• Turning Radius: Medium More

  Turning Radius

  
  
  Medium17-22 m radius is best for all-mountain and park & pipe.
  
  
  
• Core/Laminates: Olefin, Wood
• Tail Type: Partial Twin Tip More

  Tail Type

  
  
  Partial Twin TipPartial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
  
  
  
• DIN: Release Value Low: 4
• DIN: Release Value High: 13
• Warranty: None