Yes. 420 Snowboard 2024

Product Details

Rocker Type

Camber– Camber is the base of snowboarding: you need to have enough edgehold to drive in and out of turns. The camber does exactly that, allowing you to drive your turns longer and release later.

Flex

Flex Rating– 7 (1 Soft - 10 Stiff)

Shape

Radial Tapered– Inspired by Steve Lis and the revolution that occurred when kneeboards influenced surfboard design. Powder is all about speed and flotation. Displacement of a board’s volume is affected by more than just length. With the 420, Yes. is able to get the stability and float normally associated with much longer boards by punching out the waist width and drastically chopping the length. For example, the 148 has the same circumference and base surface as a traditional 160, but it’s mass is located much closer to your feet resulting in more maneuverability and far less swing weight. A slight taper (12mm) helps keep the nose up without losing the tail’s ability to hold in hard-pack. Stance is only slightly set back from center of effective edge because the difference in nose and tail shovel keeps you from going over the nose.

Directional Weird

Core

Weightless Core– The Weightless Core strikes a critical balance between light weight and strength. Using a lower density species of Poplar in areas that are not as structured and Paulownia in the areas that are, Yes. was able to shave precious weight. This helps the board not only float, but "feel" floaty.

Laminates

Biaxial Glass

Base

Sintered True– True Sintered bases are harder and more expensive than extruded, and can be faster for those that ride aggressively.

Graphics

Art by Mark Kowalchuk

Binding Compatibility

2 x 4 Inserts

Specs

• Terrain: Powder More

  Terrain

  
  
  PowderPowder snowboards love powder. Often associated with freeride snowboards, powder boards sometimes feature a wider nose and a tapered narrower tail. The binding inserts, which determine the rider´s stance, are often set back on a powder snowboard to help the rider float the tip of the board through the deep stuff. Powder snowboards sometimes also feature rocker, a design element where the tip (and tail) rise starts farther back on the board, which also helps the rider maintain tip float through the pow.
  
  
  
• Ability Level: Advanced-Expert More

  Ability Level

  
  
  Advanced-ExpertWhether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you´ll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
  
  
  
• Rocker Type: Rocker/Camber/Rocker More

  Rocker Type

  
  
  Rocker/Camber/RockerRocker/Camber/Rocker shapes seek to give you both hard-carving edgehold on firm snow from camber underfoot with enhanced turnability and float in powder from the rockered tip and tail. This profile is increasingly popular for freeride boards designed primarily for soft snow.
  
  
  
• Shape: Directional
• Flex Rating: Stiff More

  Flex Rating

  
  
  StiffThe amount a snowboard flexes varies significantly between boards. Snowboard flex ratings are not necessarily standardized across manufacturers, so the flex may vary from brand to brand. Many manufacturers will give a number rating ranging from 1-10, 1 being softest and 10 being stiffest. Here at evo we have standardized the manufacturers´ number ratings to a feel rating ranging from soft to very stiff. Generally you will find flex ratings of 1-2 as soft, 3-5 as medium, 6-8 as stiff, and 9-10 as very stiff. Flex ratings and feel may ultimately vary from snowboard to snowboard.
  
  
  
• Binding Mount Pattern: 2x4
• Core/Laminates: Wood
• Warranty: Limited Lifetime